10 - Snipa
18 foot. Length 5475, width 1750 mm.
Build in 1920's by Georg Svensson, Mölle, Skåne.
3 sheets in scale 1:10.
- 10 A Construction plan
- 10 B Rib plan
- 10 C Line plan
Plan no 10, October 1979.
Snipa, pointed and rounded
You often hear the name snipa on a boat, a name that is often mistaken on some boats. But the name is associated with the older open boats that were very slender in their lines and pointed in front and stern. These boats were light-rowed and really adapted for more protected water, but despite that we find many snipa used in the open sea. Like Ölandssnipan, Gotlandssnipan, Skånesnipan in southern Sweden. In the lakes we find Vänersnipan and Vättersnipan. The most "pointed" boats are found in Norway's fjords and coasts, such as Oselvern and the <>Nordland boat, extremely slim boathull for rowing and sailing.
The use of the boat has played a big role, for fishing with heavy gear out at sea, the slender snipa was not bearing enough. The boat builder was filling up with a more mellow stem and stern, but now the boat was not as a pointed snipa anymore, and we call this boat for rounded. Such developed in Bohuslän with its rough sea, where the boat type also got its own name, the Kosterboat.
In the Koster Islands there were formerly skilled boat builders who probably named the boat type. Early, they started building deck on the boats to increase safety, which also spread south of the country. In Blekinge there have been many talented boatbuilders, and at the end of the 1800's they began to build rounded boats that were also covered with a deck. Strangely enough they got the name Kosterboats or even Blekingekosters.
Unfortunately, we are losing the real name on our boat types and sometimes we hear "kostersnipa" for example. What is it? A rounded or pointed boat?
The snipa has originated in our nordic boats from earlier times. Viking boats were snipor, very slender and really pointed, typical for the time when the stems were high, which is something left in most of our boat types, but not so high, the stems is just a little bit above the boat hull, and this is only to be beautiful. The nordic snipa is beautiful.
The measuring is done from existing boats that are traditionally built. Some are still in use, some are stored in different museums and some are left as wrecks in different places. Some of these wrecks have more or less fallen to pieces, but are reconstructed at the plan. Several boats are gone and does not exist any more.
For most of the plans a complementary sheet with information about material and dimensions are enclosed. On the plan the boat is drawn in external profile and cross-section profile at CL. In plan, each half with interior and the other half without. All ribs are drawn.
The plans are printed on coated standard paper 90g, mostly in size A1, but can be bigger (e.g. vrakeka 28 feet) or smaller. The plans are sent rolled in a paper cylinder.
|Length (foot)||18 foot|
- Product Code: 10
- Availability: In Stock
- Ex Tax: 300kr